Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Venice, CA
Chimney repair in Venice usually means confronting what the ocean does to masonry and metal: mortar joints softened by decades of salt-laden morning fog, brick spalling behind stucco, and steel flues rusting from the outside in. Steadfast Chimney Sweep handles the full scope of it, from cracked crowns to flue-liner restoration, and we’ve served Venice since 2015. If your chimney needs work, call (833) 593-2844 for a straight answer and a free estimate.
Why Venice Homes Are Different
Venice’s housing stock runs heavily to 1920s through 1950s bungalows and beach cottages, many still carrying their original brick fireplaces. Those chimneys have spent seventy to a hundred years absorbing moist Pacific air, and the marine layer that rolls in most mornings keeps masonry damp long after the fog burns off. The result is not the creosote problem inland sweeps deal with. It’s corrosion, spalling, and mortar that crumbles when you press a finger to it.
Toss in the salt-laden onshore wind that works the west side of Venice hardest, and you get chimneys that fail from the top down: crowns that erode, flashing that lifts, and flue tiles cracked by rust-jacking from degraded steel components. The walk streets and canal neighborhoods show this more than anywhere, where exposed chimney crowns often carry a green tinge and soft, powdery mortar. Even seldom-used fireplaces still vent gas or wood smoke, so patency matters even when the firebox looks nearly new.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Venice Services
Most Venice homeowners call us for one of two things: a chimney that hasn’t been looked at in years, or a dryer vent that’s quietly filling with lint behind the wall. Here’s what each involves here.
Chimney Sweep in Venice
Chimney sweeping in Venice is less about heavy soot removal and more about inspecting what the salt air has done to the flue. Chimney Sweep in Venice jobs here commonly turn up cracked flue tiles, corroded dampers, and failing crowns even in chimneys that get lit only a handful of times each winter. We clean what’s there, then document the condition with photos so you can see exactly what we found and what can wait. For the full scope of that service and local pricing, see the linked page.
Dryer Vent Cleaning in Venice
Your dryer vent is a chimney for lint, and in Venice’s tightly packed bungalows and cottages, those vents often run long, bent, or buried routes through tight wall and roof cavities. Lint buildup in those runs is a fire hazard that has nothing to do with how clean your lint trap is. Dryer Vent Cleaning in Venice covers the full length of the run, from appliance to termination, and matters just as much in a rental off Abbot Kinney as in a 1930s original on a walk street. See that page for specifics.
Chimney Repair in Venice
Repair work in Venice skews structural faster than it does inland because the marine layer and salt air never really let up. A crown that’s cracked open by rust or a flashing seam that’s lifted by wind-driven rain lets moisture into the chimney chase, and from there the damage accelerates through the flue tiles and mortar joints. We’re a full Chimney Repair company, not a sweep that hands you a deficiency list and disappears, so we fix what we find using professional-grade materials like HeatShield, DuraFlex, and Olympia Chimney components. That matters when the work isn’t optional.
Chimney Cap Installation
Signs you need it
An open flue with no cap, or an old cap so rusted through that rain, sea spray, and birds have a clear path inside.
What it costs in Venice
Chimney cap installation in Venice typically runs $280 to $460, parts included.
How we do it
We measure the flue, select a correctly sized cap from our stocked Gelco and Copperfield components, secure it to the crown, and photograph the finished install.
Chimney Liner Installation
Signs you need it
Crumbling flue tiles in the firebox, a visible gap or crack in the flue during an inspection, or gas appliance exhaust showing signs of condensation bleed-through.
What it costs in Venice
Chimney liner installation in Venice generally lands between $2,300 and $4,000 depending on liner type, flue length, and access.
How we do it
We spec a DuraFlex liner for the appliance and fuel type, size it to the flue, run it through from crown to appliance collar, insulate where required, and seal the terminations.
What Chimney Repair Costs in Venice
| Item | Typical range in Venice |
|---|---|
| Chimney cap installation | $280 – $460 |
| Chimney liner installation | $2,300 – $4,000 |
| Chimney crown repair with HeatShield | $650 – $1,200 |
Can you repair a chimney without full relining?
Yes, often. HeatShield resurfacing can restore a damaged flue interior without full relining, which cuts cost and disruption significantly. We’re certified to apply it, so this option is on the table where the flue structure is otherwise sound.
How long does chimney repair take in Venice?
Most cap work is done in one visit. Liner installation typically runs one full day; crown repair with HeatShield may need a return visit for cure time depending on weather. We’ll give you a written scope and timeline before any work begins.
Brands We Service in Venice
We work with professional-grade materials on every repair, the same lines certified chimney technicians and masonry contractors specify. That means DuraFlex liners, HeatShield resurfacing, and Gelco, Olympia Chimney, and Copperfield caps and components. We keep common Venice sizes stocked locally, which means most cap replacements happen in a single visit. Learn more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Venice, CA
| Service | Typical range in Venice |
|---|---|
| Chimney sweep and inspection | $275 – $425 |
| Level 2 chimney inspection | $350 – $600 |
| Chimney cap installation | $280 – $460 |
| Chimney crown repair with HeatShield | $650 – $1,200 |
| Chimney liner installation | $2,300 – $4,000 |
| Chimney flashing repair | $400 – $800 |
| Dryer vent cleaning | $150 – $250 |
| Birds and debris removal | $180 – $320 |
What pushes price up in Venice is the same thing that creates the work in the first place: salt exposure. A rusted-out cap that’s fused to a crumbling crown takes longer to remove cleanly, and chimneys on older walk-street bungalows are sometimes tight on access for ladders and staging. Whatever the job, we give you a flat-price scope before we start, so the number you approve is the number you pay.
Neighborhoods We Serve in Venice
We run daily routes through Venice and know the difference between a canals bungalow with a 1930s brick flue and a newer stucco infill build with a prefab metal stack. Most Venice calls get a visit within a few business days, not weeks, because we’re based just up the coast in Santa Monica and keep local scheduling blocks open.
- Abbot Kinney and the Arts District
- Venice Canals
- Walk Streets (east and west of Lincoln)
- Oakwood
- Silver Strand and Marina Peninsula
Service Area – Cities Near Venice
Steadfast Chimney Sweep is based in Santa Monica, CA, and we cover the nearby Westside and South Bay communities around Venice. That includes Westchester, CA to the south, Hawthorne, CA further inland, and up over the Sepulveda Pass into Sherman Oaks, CA. If you’re just outside Venice, call and ask; our routes cover a broad swath of the basin.
Serving Venice, CA – Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Venice
Most Venice calls get scheduled within a few business days. Since we’re based in Santa Monica and run daily routes through the Westside, we don’t batch Venice work into a monthly run. For urgent venting concerns, we’ll do our best to fit you in sooner. Call (833) 593-2844 for current availability.
Most repair work we do in Venice doesn’t require a permit. Replacing a cap, liner, or flashing is considered maintenance on an existing system. The exception is structural rebuild work beyond what we perform. We’ll tell you plainly if anything on your scope crosses that line before we start.
Even an unused chimney is a hole in your roof that lets rain and salt air into the house. Deteriorating caps and crowns are a common source of water damage in Venice’s older bungalows, regardless of whether the fireplace ever gets lit. Also, many chimneys double as vents for gas appliances or water heaters, so patency and corrosion matter even without fires.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Gilbert Torres"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Christine Wong"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Tracy Thompson